Friday, March 26, 2010

Lean Software Development

Some study notes while reading about Lean Software Development:
  • Adapted from Lean Manufacturing, Toyota Production System;
  • Originated in the boot "Lean Software Development" by Mary Poppendieck and Tom Poppendieck
  • Principles:
    • Eliminate waste
      • Extra features
      • Economies of scale: focusing on high utilization is almost guaranteed to lower it
      • Cross boundaries

    • Amplify leaning
    • Decide as late as possible
    • Deliver as fast as possible
    • Empower the team
    • Build integrity in
    • See the whole

  • Two pillars
    • Continuous improvement
    • Respect for people

  • The responsibility lies, not with black belt specialist, but with the leadership hierachy that runs the operation and they are teachers and coaches;
  • The essence of (the Toyota system) is that each individual employee is given the opportunity to find problems in his own way of working, to solve them and to make improvements;
  • Challenge everything, dissatisfied with status quo
  • Kanban
  • Kaizen
    • spread knowledge
    • small, relentless
    • retrospectives
    • 5 whys
    • eyes for waste

  • Share rather than enforce practices
Good References:


http://en.wikipedia.org/wiki/Lean_software_development

Lean Primer: http://www.leanprimer.com/downloads/lean_primer.pdf

http://www.poppendieck.com/

Friday, January 29, 2010

Flex Builder Error: "Unable to export SWC oem"

Solution: Right click on project, select Properties > Flex Library Build Path > Assets. Uncheck the root node and check it again, then compile project. The error is gone.

I found the solution here: http://flexdevtips.blogspot.com/2009/06/unable-to-export-swc-oem.html

Friday, January 15, 2010

Performance Optimization for Embedded Systems

Some key points:
  • Load code and data as much as possible into internal memory (L1 cache);
  • Use compiler or linker options to optimize for code size can sometimes give better performance than optimize for performance (GreenHills has a very nice tool to help find the optimum compromise between optimize for speed and size). Major points for manipulation:
    • Optimize for speed
    • Optimize for size
    • Remove unused functions
    • Remove debug information
    • Enable code cache
  • Carefully tune the use of code cache and data cache. Performance difference between fine tuned layout and the default can be 10 time or more;
  • Use integer, fixed point over float over double. If floating point computation is necessary, but double is not needed, then remember that all the constants MUST explicitly declared as floating precision, otherwise there may be a lot of double computation and float to double conversions. For example, instead of x=2.0; should use x=2.0f;
  • Bit shift is faster than add (usually), add is faster than multiply (usually), multiply is faster than divide. So the following tricks usually are helpful:
    • Use left shift and right shift instead of multi and div by 2, 4, 8, 16, 32, ... (integer only);
    • Use add instead of multi 2, 3;
    • If a number is used as divider many times, pre-calculate it's inverse, and use multiply for the calculations;
  • Blackfin (DSP architecture specific): assign data to A/B bank properly to enable parallel data retrieval;
  • Profiler is your friend: use profiler to find the biggest consumer and focus on them;
  • In C++ world: avoid deep hierarchy, because those practices take precious memory space which in turn have grave impact on performance;
  • Be careful when you use C runtime. Call to "printf" can easily add 1k memory footprint;

Thursday, January 14, 2010

"var scope" for CFC Function Variables

Why is it good practice to always "var-scope" every CFC function variable?
  • Make it clear that the variables are only visible within the function;
  • Using "var-scope" actually can help improve performance. I tried the test here, and am personally convinced that "var-scope" has significant positive impact on performance;
  • If you "var-scope" every CFC function local variables, then it will be obvious when you have typo in your code. Because you can use tool like "varScoper" to scan your file, if there are complains, you either forget to "var-scope" a variable, or you've got a typo that "varScoper" just helped you to catch;

Monday, December 14, 2009

Start ASP.NET Development Web Server in Command Line

start "ASP.NET Development Server" /B c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\WebDev.WebServer.EXE /port:[port#] /path:[file path] /vpath:[/virtual parth/]

Starting debug server this way will allow debugging web project without even starting Visual Studio 2005.

Friday, December 04, 2009

VC++ Redistributing

Symptom: I keep bumping into this issue. Once in a while my VC++ application does not even start on the targe computer.

Cause: The root cause is that the target computer does not have the VC++ library to support the applications. I works with server products, so I usually just install VC++ library once and expect all my future updates can be done by xcopy only. However, because I turned on auto-update on my development computer, my Visual Studio 2005 keep changing the library it is linked against. So once in a while xcopy deployment is broken.

Fix:
  • Sometimes it can be fixed by simply running Windows Update
  • Run VC++ Redistributable Package on the target computer. It is located here: %PROGDIR%\Microsoft Visual Studio 8\SDK\v2.0\Bootstrapper\Packages\
  • More options here: Choosing a Deployment Method

Monday, November 16, 2009

GridView: get selected rows

Below is sample C# code to get selected rows in GridView.

protected int[] GetSelectedRows()
{
List rowIDs = new List();
foreach (GridViewRow row in GridView.Rows)
{
CheckBox cb = ((CheckBox)row.FindControl("chkRow"));
if (cb.Checked)
{
string IDString = GridView.DataKeys[row.RowIndex].Value.ToString();
rowIDs.Add(Int32.Parse(IDString));
}
}
return rowIDs.ToArray();
}

"SelectAll" CheckBox in GridView using jQuery

Here is a way to do it:


/**
* Register logic for "select all" check box and the group of check boxes
* for each data row.
*
* @param {Object} chkAllSelector jQuery selector to find the "select all" check box
* @param {Object} chkItemSelector jQuery selector to find the check boxes for all the rows
*/

function registerSelectAll(chkAllSelector, chkItemSelector) {
//"select all" checkbox
var checkAllBox = $(chkAllSelector);
//checkbox for each row
var checkItems = $(chkItemSelector);

//check/uncheck all rows if "select all" is clicked
checkAllBox.bind("click", function(){
checkItems.each(function(){
this.checked = checkAllBox[0].checked;
})
});

//uncheck "select all" if some rows are unchecked
checkItems.bind("click", function(){
if(this.checked === false) {
checkAllBox[0].checked = false;
}
});
}


To use it:

registerSelectAll(".chkAllHeader input", ".chkItem input");

Monday, November 09, 2009

"An unexpected error occurred." accessing Network Connection's properties

Cause: seems like it suddenly happens after a recent Windows Update. I cannot ping or "remote desktop" to the computer. Trying to access network connection give me this error: "An unexpected error occurred."

Solution:
This seems to fix the problem:
command line:
regsvr32 netshell.dll
regsvr32 ole32.dll
reboot

Then I can access the properties page, and I disable/re-enabled firewall. Everything coming back to normal.

P.S.
Keep my fingers crossed. Waiting for more surprised from next automatic Windows Update.

Wednesday, October 14, 2009

3D Visualization on iPhone - Got to see it to believe it

Ziosoft showcased this amazing 3D visualization on iPhone. It is fast and smooth with very high image resolution. With dual touch, seem like it is very easy to control zoom, move cutoff plane, rotate and move object, and select depth of rendering.

http://www.youtube.com/watch?v=sDVAosnh1j4&feature=channel_page

From their description and the look, it is obvious that there is web server doing the rendering behind. iPhone seem to provide the dual touch and navigation. Still the the speed is impressive. Either the iPhone has very high speed internet access, or there is some very efficient decompress and rendering algorithms running on it so that data transfer rate is not too high.

Monday, August 10, 2009

Server Explorer Missing

Symptom: Visual Studio 2005 Server Explorer is missing.
Reason: A while back, Visual Studio failed to load the server explorer at starup time, and showed a dialog to disable it. I guess I accidentally clicked "yes".

Solution: run this command in Visual Studio 2005 command line environment:
devenv /resetskippkgs

Tuesday, June 30, 2009

Refeactor! for C++ -- Review

Tried Refactor! for C++ (free version 9.1.5 published June 29, 2009). Visual Studio 2005

Summary of my experience:
Pros:
  • Free;
  • The idea is very attractive: refactor C++ code with right click and no modal dialogs;
  • Rename class names seem to work fine;
Cons:
  • Does not work most of the times. Usually global search and replace did a better job in renaming things;
  • Affects VS grammar highlight. After installation, code grey out by "ifdef"s are totally messed up. Unistall the softwate, Visual Studio went back to correct grey out;

Recommended? No. I uninstalled the software after a few days.

Still looking for a decent C++ refactoring tool.

Monday, December 29, 2008

Modem Error: NO CARRIER

What to check when you get "NO CARRIER" (numeric code: 3) error from Modem:
  • Verify Modem is connected to phone line properly;
  • Verify the phone number you are dialing works properly by calling this number using your phone, and verify that you hear: first ring tone, then the negotiation tone (yes, you should be able to hear the chirping sound over a regular phone);
If you can hear the negotiation tone, but frequently get "NO CARRIER" error, here is a solution:
Set modem register S7 to a longer timeout value. 50 is the default, you can set it to 120 (ATS7=120). Sometimes, you can set this timeout value through MODEM configuration GUI, you can find something like: "Cancel the call if not connected within __ seconds".

Friday, November 07, 2008

Firefox keep crashing -- a solution

Every couple of days, I will see my Firefox using 99% of CPU and crash.

I am a web developer. My Firefox has all sorts of add-ons: Abduction, Firebug, Html Validator, ScapBook, Screen grab!, Web Developer, YSlow. So, I do not need YSlow to know why my Firefox is slow and tend to crash.

I have an idea: how about start two instances of Firefox, one with all the add-ons and the other one clean. I will use the clean one for normal web browsing, and the fully loaded one with development. And, guess what, there is already someone who has done this and posted a blog about it: Firefox: Run a Regular and Development Profile at the Same Time. I used the solution, and it works perfectly.

Friday, September 26, 2008

Blue Screen Trying to Install Windows XP SP3

During last few months, I have been through a couple of Windows XP SP3 installation. They are mostly eventless. One of the worst was a computer that hung after reboot, but after a forced power recycle that system seem to be fine.

Just when I am about to conclude that Windows XP SP3 update is pretty good, I got the famous Blue Screen of Death.

While trying to install Windows XP SP3 on my computer, I got an "Access is denied" error message. So that was not too scary, I typed the error message along with keyword "Windows XP SP3" in Google and found an MSKB 949377 which provided a solution to this exact problem.

Now, following KB 949377, I downloaded full Windows XP SP3 package and subinacl.exe, and created Reset.CMD. But, I tried it 3 times, everytime I ran Reset.CMD, it gave me Blue Screen of Death with error message about registry access. So, I did another Google search with keywords: "windows xp sp3 access denied subinacl registry blue screen". Now "I'm feeling lucky". The first hit provides a solution that works perfectly for me. Here is link to Jason's blog post that solved my problem: http://www.mrfloppysa.com/wordpress/?p=13

The trick is to remove the HKLM line in RESET.CMD. The new RESET.CMD file would be like this:

cd /d "%ProgramFiles%\Windows Resource Kits\Tools"
REM subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f
subinacl /subdirectories %windir%\*.* /grant=administrators=f /grant=system=f
secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose

Thursday, August 21, 2008

How to Delete Broken Windows Service

As a developer who writes Windows Services, I sometimes get services registered with the source code and executables long gone (because I no longer work on that project). When it finally came the time to cleanup. I found it difficult to remove them from the registry without the original executables.

After a bit of Google, however, I found a useful tool: sc.exe (Service Controller Tool) come with Windows Resource Kit. This command line tool make deleting service very easy, just run:
sc.exe delete [service name]

Notice: the service name for the command line is not the same as "Name" you see in the list (this is usually the "Display Name"). You need to double click the service to open the properties page. And there you will find "Service Name".

Thursday, July 24, 2008

C++/CLI Gotchas

C++/CLI is a hybrid monster. I am very green in the world of C++/CLI. Below are a few very stupid problems I have met.

Example 1: If you are writing unsafe code in C++/CLI with mixed managed code and unmanaged code, it proved to be more dangerous than plain old C++. Here are a few examples of using System::String together with char (C native data type). Without thorough understanding of the new .NET String class will create code that compiles perfectly but return unexpected results to you in run time.

String^ str = "";
char ch = 'a';
str += ch; //result: str="97", instead of "a", because it called ch.ToString()
str = gcnew String(&ch); //result: str="a@#!$%", because &ch is considered to be a string
str = gcnew String(&ch, 0, 1); //result: str="a" as expected.


Example 2: Visual Studio 2005 Debugger is a liar

int i;
i=1000;
... //all the code in between so that you forgot what is defined
for(int i=0; i < 3; i++)
{
...
}
int k = i++; //if you set a break here, Visual Studio Debugger will tell you i=4??!

I agree that the code above is stupid which is an artifact from trying to correct old VC++ code. But Debugger giving a wrong answer wouldn't help!

Monday, July 07, 2008

C++/CLI Warning C4945

Reason: This warning was generated because I referenced multiple C# projects in the C++/CLI project, and they all have "copy local" set to true.

Solution: Change reference to the C# projects, set all "copy local ..." properties to false.

A hotfix is available, which does not seem to be in SP1 as of 7/7/2008. So this fix probably will never be publicly available. This proves again C++/CLI is not on the top of TODO list for Visual Studio team.

Reference:
Microsoft KB 922271: http://support.microsoft.com/kb/922271

Wednesday, May 07, 2008

Convert VC++6 to VC++7 -- (2)

Below is a laundry list of the problems and solutions.

Compiler Error: fatal error C1083: Cannot open include file: 'fstream.h': No such file or directory
Solution: change include from fsream.h to fstream, and add using namespace std;
Related problems: ios::nocreate and ios::noreplace are deprecated. ios::nocreate is replace by ios::in

CFile::ReadHuge() and CFile::WriteHuge() are obsolete. Use CFile::Read() and CFile::Write() instead.

Replace &afxChNil by empty string "".

Compiler Error:
  • error C2059: syntax error : '<'
  • error C2143: syntax error : missing ';' before '<'
  • error C2182: 'ConstructElements' : illegal use of type 'void'
  • error C2988: unrecognizable template declaration/definition
Solution: ConstructElements and DestructElements are deprecated. Remove definition of these functions. Ref: Microsoft KB 318734

WINVER default changed to 0x0501 (Windows XP). If your program still want to support Windows 2000, the the following line must be included in the project:
#define WINVER 0x0400

CPropetySheetEx, CPropertyPageEx are deprecated, they are included back to CPropertySheet and CPropertyPage.


CString s(45) no longer compiles. Because CString is changed to template based function with more constructors. This definition has ambiguous overloaded constructors. Change to CString s((TCHAR)45).



VC++7.1 has stricter type requirements. For example, conversion from HANDLE to int and uint is not allowed.

Compiler Error:
error C2668: 'sqrt' : ambiguous call to overloaded function
Solution:
sqrt, fabs, log and other CRT math functions support both double and float type now. An integer input to these functions will cause the error above.
Example:
int i = 10;
float f = sqrt(i); //error C2688
float f = sqrt((float)i); //compiles ok


Compiler Error:
error C2440: 'static_cast' : cannot convert from 'void (__thiscall XXXXXXXX::* )(void)' to 'void (__thiscall XXXXXX::* )(NMHDR *,LRESULT *)'
Solution:
Function signature of event handler OnKillfocus was changed from void Func(void) to void Func(NMHDR*, LRESULT*).

Thursday, May 01, 2008

Convert VC++6 to VC++7 -- (1)

VC++6 is a pretty solid product, which can still produce decent software in Windows XP. But Microsoft has decided to stop support for VC6 for about 2 years now. With the arrival of VS2008 and Windows Vista, it might finally be the time to convert those old projects that you still want to keep alive into a newer platform.

To start the conversion is really easy, just open the .dsp file in Visual Studio 2003. It will convert the project for you automatically, and generate the .vcproj and .sln files. If you are lucky, the next step is press F7 to build the solution and press F5 to run it, and you are done. Unfortunately, 90% of us will need to change the code to make it even compile. VC++6 is less standard compliant than VC++7 and there are some other breaking changes in VC++7.

This series will report problems I've seen when I convert a VC++6 project to VC++7 and some tips to help smooth the process.

Tip 1: for a project that is still actively maintained, during the conversion care must be taken so that changes do not break the software under VC++6. Use this to allow the code changes exists peacefully in VC++6:

#if _MSC_VER >=1500
//this is VC++9.0 or above
#elif _MSC_VER >= 1400
// this is VC++8.0
#elif _MSC_VER >= 1310
// this is VC++7.1
#elif _MSC_VER > 1300
// this is VC++7.0
#else
//assume VC++6
#endif